CVE-2026-33774— Juniper Networks Junos OS MX 代码问题漏洞

Junos OS: MX Series: Firewall filters on lo0.<non-0> in the default routing instance are not in effect

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device. On MX platforms with MPC10, MPC11, LC4800 or LC9600 line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance. An affected configuration would be: user@host# show configuration interfaces lo0 | display set set interfaces lo0 unit 1 family inet filter input <filter-name> where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI. The issue can be observed with the CLI command: user@device> show firewall counter filter <filter_name> not showing any matches. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R2.

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N

对因果或异常条件的不恰当检查

Juniper Networks Junos OS MX 代码问题漏洞

Juniper Networks Junos OS MX是美国瞻博网络（Juniper Networks）公司的一套专用于该公司的硬件设备的网络操作系统。该操作系统提供了安全编程接口和Junos SDK。 Juniper Networks Junos OS MX 23.2R2-S6之前版本、23.4R2-S7之前版本、24.2R2之前版本和24.4R2之前版本存在代码问题漏洞，该漏洞源于对异常或特殊情况检查不当，可能导致未经身份验证的攻击者绕过防火墙过滤器并访问设备控制平面。

N/A

N/A