目标达成 感谢每一位支持者 — 我们达成了 100% 目标!

目标: 1000 元 · 已筹: 1359 元

100%

CVE-2024-58238— Linux kernel 安全漏洞

一分钟漏洞结论

影响对象
Linux Linux
利用判断
尚无明确在野利用证据,仍需结合暴露面评估
建议动作
优先检查厂商安全公告和参考链接中的修复版本;无法立即升级时,限制受影响服务暴露并加强监测。

Linux kernel是美国Linux基金会的开源操作系统Linux所使用的内核。 Linux kernel存在安全漏洞,该漏洞源于btnxpuart驱动程序中电源保存功能处理不当,可能导致TX超时错误。

CVSS 7.1 · High EPSS 0.16% · P5

影响版本矩阵 6

厂商产品 版本范围状态
Linux Linux 689ca16e523278470c38832a3010645a78c544d8< 9d5df94ce0e213d5b549633f528f96114c736190 affected
689ca16e523278470c38832a3010645a78c544d8< e4db90e4eb8d5487098712ffb1048f3fa6d25e98 affected
6.4 affected
< 6.4 unaffected
6.6.49≤ 6.6.* unaffected
6.9≤ * unaffected
获取后续新漏洞提醒 登录后订阅

一、 漏洞 CVE-2024-58238 基础信息

漏洞信息

对漏洞内容有疑问?看看神龙的深度分析是否有帮助!
查看神龙十问 ↗

尽管我们使用了先进的大模型技术,但其输出仍可能包含不准确或过时的信息。神龙努力确保数据的准确性,但请您根据实际情况进行核实和判断。

Vulnerability Title
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
来源: CVE Program / CVE List V5
Vulnerability Description
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: <load btnxpuart.ko> hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested above script for 50,000 iterations and TX timeout error was not observed anymore.
来源: CVE Program / CVE List V5
CVSS Information
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H
来源: CVE Program / CVE List V5
Vulnerability Type
N/A
来源: CVE Program / CVE List V5
Vulnerability Title
Linux kernel 安全漏洞
来源: 中国国家信息安全漏洞库 CNNVD
Vulnerability Description
Linux kernel是美国Linux基金会的开源操作系统Linux所使用的内核。 Linux kernel存在安全漏洞,该漏洞源于btnxpuart驱动程序中电源保存功能处理不当,可能导致TX超时错误。
来源: 中国国家信息安全漏洞库 CNNVD
CVSS Information
N/A
来源: 中国国家信息安全漏洞库 CNNVD
Vulnerability Type
N/A
来源: 中国国家信息安全漏洞库 CNNVD

受影响产品

厂商 产品 影响版本 CPE 订阅
Linux Linux 689ca16e523278470c38832a3010645a78c544d8 ~ 9d5df94ce0e213d5b549633f528f96114c736190 -
Linux Linux 6.4 -

二、漏洞 CVE-2024-58238 的公开POC

# POC 描述 源链接 神龙链接
AI 生成 POC 高级

未找到公开 POC。

登录以生成 AI POC

三、漏洞 CVE-2024-58238 的情报信息

请登录查看更多情报信息。

IV. Related Vulnerabilities

V. Comments for CVE-2024-58238

暂无评论


发表评论