CVE-2026-89903— LoongArch 架构 RETHOOK 蹦床基址寄存器处理缺陷
一分钟漏洞结论
影响对象
Linux Linux
利用判断
尚无明确在野利用证据，仍需结合暴露面评估
建议动作
优先检查厂商安全公告和参考链接中的修复版本；无法立即升级时，限制受影响服务暴露并加强监测。
在 Linux 内核中，以下漏洞已得到修复： LoongArch：不要在 rethook 跳板代码中保存/恢复每 CPU 基址寄存器 rethook 跳板代码在入口时将 $r21（即 $u0，每 CPU 基址）压入栈帧，并在出口时恢复它。而在入口与出口之间， 可能通过 触发进程调度。 如果任务在此过程中被迁移到另一个 CPU，栈帧中保存的 $r21 是旧 CPU 的每 CPU 基址。在退出跳板代码时恢复该值，会导致新 CPU 上的 $r21 被“污染”。在下一次用户态到内核态的上下文切换之前（该切换会修正 $r21
可能的 ATT&CK 技术 1 AI
T1610 · Deploy Container影响版本矩阵 12
| 厂商 | 产品 | 版本范围 | 状态 |
|---|---|---|---|
| Linux | Linux | 3f5536860086d906b01ec5ed68cf50c7edcc40af< a03b5e7483ad2c33ba5dd2adb8552e84bfee8fe2 |
affected |
3f5536860086d906b01ec5ed68cf50c7edcc40af< 8f15e95b438bc6b3c9f23a33c9a0d0678ebd1dc8 |
affected | ||
3f5536860086d906b01ec5ed68cf50c7edcc40af< 266ffc92e68593759adfe3d58f188773d32782c3 |
affected | ||
3f5536860086d906b01ec5ed68cf50c7edcc40af< c048b0a3c0836c4b1bef4b51d355d27090bf6790 |
affected | ||
3f5536860086d906b01ec5ed68cf50c7edcc40af< c3f2feace5e4f4b01b68b9f947b19adb4155c32e |
affected | ||
6.3 |
affected | ||
< 6.3 |
unaffected | ||
6.6.157≤ 6.6.* |
unaffected | ||
| … +4 条更多 | |||
获取后续新漏洞提醒
登录后订阅
一、 漏洞 CVE-2026-89903 基础信息
漏洞信息
对漏洞内容有疑问？看看神龙的深度分析是否有帮助！
查看神龙十问 ↗
尽管我们使用了先进的大模型技术，但其输出仍可能包含不准确或过时的信息。神龙努力确保数据的准确性，但请您根据实际情况进行核实和判断。
Vulnerability Title
LoongArch: Do not save/restore percpu base register in rethook trampoline
来源: CVE Program / CVE List V5
Vulnerability Description
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Do not save/restore percpu base register in rethook trampoline
The rethook trampoline saves $r21 ($u0), the percpu base, into its frame
at entry and restores it at exit. Inbetween rethook_trampoline_handler()
may schedule via preempt_enable_notrace().
If the task migrates to another CPU, the frame's $r21 holds the old
CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until
the next user->kernel transition heals $r21, all this_cpu_*() accesses
(runqueues, RCU per-CPU data, timer tick programming, FPU ownership)
hit the wrong CPU's percpu area.
Under kretprobe-heavy preemptible load this can corrupt scheduler and
timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings,
WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs
parking in the idle loop with the constant timer never re-armed (hard
lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths
plus heavy file churn (OS install / unsquashfs).
By convention $r21 always holds the current CPU's percpu base in kernel
mode: SAVE_SOME() at exception entry reloads it only when coming from
user mode, and RESTORE_SOME() restores it only when returning to user
mode; the context-switch path never writes it. Therefore the live $r21
at trampoline exit is already correct, and nothing inbetween can change
it legitimately (kernel C code cannot write a global register variable).
The same flaw existed even in the pre-rethook kretprobe trampoline since
v6.3; it was carried over when rethook replaced it. Drop both the save
and the restore here. Drop the restore is enough to solve the issue, and
drop the save is to keep the code tidy and no need to clear it.
来源: CVE Program / CVE List V5
CVSS Information
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
来源: CVE Program / CVE List V5
Vulnerability Type
N/A
来源: CVE Program / CVE List V5
受影响产品
二、漏洞 CVE-2026-89903 的公开POC
| # | POC 描述 | 源链接 | 神龙链接 |
|---|
AI 生成 POC
高级
未找到公开 POC。
登录以生成 AI POC三、漏洞 CVE-2026-89903 的情报信息
请登录查看更多情报信息。
CVE-2026-89903 其他参考 (5)
同批安全公告 · Linux · 2026-09-16 · 共 276 条
| CVE-2026-90048 | 9.8 CRITICAL | Linux内核NTFS3文件系统越界写漏洞 |
| CVE-2026-90012 | 9.8 CRITICAL | SPI DMA映射所有权修复 |
| CVE-2026-89970 | 9.8 CRITICAL | NVM Target SQ拆除时超时工作未同步 |
| CVE-2026-89857 | 9.8 CRITICAL | QLogic qla2xxx NVMe LS拒绝竞态条件漏洞 |
| CVE-2026-89969 | 9.8 CRITICAL | Linux内核 nvmet-tcp 越界写入漏洞 |
| CVE-2026-89847 | 9.8 CRITICAL | qla2xxx SCSI驱动异步IOCB超时双重完成漏洞 |
| CVE-2026-89972 | 9.8 CRITICAL | NVMe驱动错误路径SRCU宽限期缺失漏洞 |
| CVE-2026-89990 | 9.8 CRITICAL | Ceph ceph_mds_check_access 互斥锁缺失漏洞 |
| CVE-2026-90036 | 9.8 CRITICAL | Linux NFSd 阻塞锁收割时释放后使用漏洞 |
| CVE-2026-90038 | 9.8 CRITICAL | Linux内核NFSD导出撤销后使用漏洞 |
| CVE-2026-90037 | 9.8 CRITICAL | Linux内核NFSD close_lru释放后使用漏洞 |
| CVE-2026-89788 | 9.8 CRITICAL | Linux kernel ksmbd 释放后使用漏洞 |
| CVE-2026-89783 | 9.8 CRITICAL | Linux内核 xfrm6 越界写入漏洞 |
| CVE-2026-90042 | 9.8 CRITICAL | Ceph 虚拟内存分配缓冲区文件名解密漏洞 |
| CVE-2026-89778 | 9.8 CRITICAL | isofs 空 zisofs 块页面数组越界访问漏洞 |
| CVE-2026-89915 | 9.3 CRITICAL | KVM arm64 移除虚拟机级 VNCR 映射计数器 |
| CVE-2026-90049 | 9.3 CRITICAL | 内核网络子系统中skb_zerocopy处理中的缺陷 |
| CVE-2026-89775 | 9.3 CRITICAL | KVM arm64 VNCR TLB大小计算漏洞 |
| CVE-2026-89916 | 9.3 CRITICAL | KVM arm64 VNCR失效重试漏洞 |
| CVE-2026-89930 | 9.3 CRITICAL | KVM嵌套虚拟化本地TLB刷新漏洞 |
显示前 20 条，共 276 条。 查看全部 → →
IV. Related Vulnerabilities
V. Comments for CVE-2026-89903
暂无评论