CVE-2026-98562— libwx 网络模块 Tx 时间戳处理竞态漏洞
一分钟漏洞结论
影响对象
Linux Linux
利用判断
尚无明确在野利用证据，仍需结合暴露面评估
建议动作
优先检查厂商安全公告和参考链接中的修复版本；无法立即升级时，限制受影响服务暴露并加强监测。
在 Linux 内核中，以下漏洞已得到修复： net: libwx: 修复 Tx 时间戳处理中的竞态条件 wx->ptp_tx_skb 在 Tx（发送）路径、PTP 辅助工作线程以及时间戳清理路径之间共享。虽然 WX_STATE_PTP_TX_IN_PROGRESS 标志位可以防止多个 Tx 路径同时提交时间戳请求，但它无法对辅助工作线程与清理路径进行序列化保护。 因此，wx_ptp_clear_tx_timestamp() 可能在 wx_ptp_tx_hwtstamp_work() 获取其指针之后释放 skb。随
获取后续新漏洞提醒
登录后订阅
一、 漏洞 CVE-2026-98562 基础信息
漏洞信息
对漏洞内容有疑问？看看神龙的深度分析是否有帮助！
查看神龙十问 ↗
尽管我们使用了先进的大模型技术，但其输出仍可能包含不准确或过时的信息。神龙努力确保数据的准确性，但请您根据实际情况进行核实和判断。
Vulnerability Title
net: libwx: fix races in Tx timestamp handling
来源: CVE Program / CVE List V5
Vulnerability Description
In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix races in Tx timestamp handling
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one.
来源: CVE Program / CVE List V5
CVSS Information
N/A
来源: CVE Program / CVE List V5
Vulnerability Type
N/A
来源: CVE Program / CVE List V5
受影响产品
二、漏洞 CVE-2026-98562 的公开POC
| # | POC 描述 | 源链接 | 神龙链接 |
|---|
AI 生成 POC
高级
未找到公开 POC。
登录以生成 AI POC三、漏洞 CVE-2026-98562 的情报信息
请登录查看更多情报信息。
CVE-2026-98562 补丁与修复 (2)
同批安全公告 · Linux · 2026-10-18 · 共 436 条
| CVE-2026-98583 | NFC nfcmrvl 驱动命令长度校验越界漏洞 | |
| CVE-2026-98570 | Linux IPv6 子网路由表项处理信息泄露漏洞 | |
| CVE-2026-98571 | stmmac 驱动 skb 构建失败后内存泄漏漏洞 | |
| CVE-2026-98572 | bpf MIPS32 JEQ/JNE 跳转指令逻辑漏洞 | |
| CVE-2026-98573 | Linux 内核 IPv6 校验和计算整数下溢漏洞 | |
| CVE-2026-98574 | bcmgenet 网络驱动 NAPI 停止前禁用队列漏洞 | |
| CVE-2026-98575 | pn533 NFC 驱动越界读取漏洞 | |
| CVE-2026-98576 | Linux NFC LLCP 服务名日志越界读漏洞 | |
| CVE-2026-98577 | NFC LLCP 模块 WKS SAP 劫持漏洞 | |
| CVE-2026-98578 | Linux st21nfca ISO15693 库存长度验证漏洞 | |
| CVE-2026-98579 | NFC LLCP SDreq TLV 列表泄露漏洞 | |
| CVE-2026-98580 | Linux NFC LLCP 接受队列生命周期竞态条件漏洞 | |
| CVE-2026-98581 | NFC LLCP nfc_llcp_recv_dm 列表损坏/引用计数不同步 | |
| CVE-2026-98582 | ST21NFCA NFC 驱动接收帧大小验证漏洞 | |
| CVE-2026-98594 | tg3 驱动 PHYLIB 资源清理漏洞 | |
| CVE-2026-98591 | bpf skb 动态指针越界漏洞 | |
| CVE-2026-98592 | Spacemit 网络驱动传输描述符处理漏洞 | |
| CVE-2026-98593 | Linux s390 调试功能空指针解引用漏洞 | |
| CVE-2026-98590 | bpf 上下文代码生成逻辑修复 | |
| CVE-2026-98595 | Linux 内核 UDP 4 元组哈希表移除漏洞 |
显示前 20 条，共 436 条。 查看全部 → →
IV. Related Vulnerabilities
V. Comments for CVE-2026-98562
暂无评论