Goal Reached Thanks to every supporter — we hit 100%!

Goal: 1000 CNY · Raised: 1359 CNY

100%

CVE-2026-99153— scsi: libiscsi: Validate the ITT reflected in a Reject PDU

Quick assessment

Affected
Linux Linux
Exploitation
No confirmed in-the-wild exploitation; assess based on exposure
Recommended action
Check the vendor advisory and references for a fixed version. If immediate upgrade is impossible, restrict exposure and increase monitoring.

在 Linux 内核中,以下漏洞已被修复: scsi: libiscsi:验证 Reject PDU 中反射的 ITT Reject PDU(协议数据单元)会携带被拒绝报文的头部副本,而 函数会从该副本中提取 ITT(Initiator Task Tag,发起方任务标签),用于查找需要清理的任务: 该 ITT 值完全由目标设备(Target)提供。 仅将索引与 进行边界检查,未做其他验证,因此攻击者可以指定任务池中的任意任务,随后 会将其标记为完成。 若使用一个从未被分配过的索引,则对应的 为 NULL:任务池在会

AI Predicted 8.8 Difficulty: Moderate
Get alerts for future matching vulnerabilities Log in to subscribe

I. Basic Information for CVE-2026-99153

Vulnerability Information

Have questions about the vulnerability? See if Shenlong's analysis helps!
View Shenlong Deep Dive ↗

Although we use advanced large model technology, its output may still contain inaccurate or outdated information.Shenlong tries to ensure data accuracy, but please verify and judge based on the actual situation.

Vulnerability Title
scsi: libiscsi: Validate the ITT reflected in a Reject PDU
Source: CVE Program / CVE List V5
Vulnerability Description
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] <IRQ> [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0
Source: CVE Program / CVE List V5
CVSS Information
N/A
Source: CVE Program / CVE List V5
Vulnerability Type
N/A
Source: CVE Program / CVE List V5

Affected Products

Vendor Product Affected Versions CPE Subscribe
Linux Linux 8afa1439fcff58da8f28c1d083046f229f6ab3de ~ 7215a69b6456fda79c0935c2959045dff3fcaac8 -
Linux Linux 2.6.32 -

II. Public POCs for CVE-2026-99153

# POC Description Source Link Shenlong Link
AI-Generated POC Premium

No public POC found.

Login to generate AI POC

III. Intelligence Information for CVE-2026-99153

请登录查看更多情报信息。

Patches & Fixes for CVE-2026-99153 (1)

Same Patch Batch · Linux · 2026-10-28 · 117 CVEs total

CVE-2026-99143 tracing: Keep the predicate limit separate from program capacity
CVE-2026-99129 selinux: fix BPF token permission checks
CVE-2026-99130 io_uring/cancel: don't spin on local work the task can't run
CVE-2026-99131 xfs: fix capability check in xfs
CVE-2026-99133 net/iucv: fix the recvmsg window update
CVE-2026-99132 xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
CVE-2026-99134 mac802154: fix data race and NULL deref on local->assoc_dev
CVE-2026-99135 dm-integrity: fix infinite loop on discard with large tag size
CVE-2026-99137 cifs: don't update i_size in cifs_do_truncate without a cached handle
CVE-2026-99136 dm-crypt: fix a tiny race condition in crypt_dec_pending
CVE-2026-99138 tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO)
CVE-2026-99140 tracing: Fix hist trigger timestamps for buffered events
CVE-2026-99139 tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION)
CVE-2026-99141 tracing: Fix crash in print_graph_function_event()
CVE-2026-99142 tracing: Check operator stack capacity before pushing
CVE-2026-99156 scsi: st: Fix use-after-free race between st_remove() and st_open()
CVE-2026-99151 drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
CVE-2026-99152 scsi: libiscsi: Validate the task named by a management response
CVE-2026-99154 scsi: libiscsi: Reject a negative task index from parse_pdu_itt
CVE-2026-99150 drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr

Showing top 20 of 117 CVEs. View all on vendor page &rarr; →

IV. Related Vulnerabilities